Chad's Ysians Autumn/Winter 2013

For Tale of X Gamers painting blogs
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Chad's Ysians Autumn/Winter 2013

Postby Chad » Sat Oct 19, 2013 12:08 am

Here's the WIP of my Brutes, still a ways to go but a decent start imo. I've used GW brand paints.

Brown: Mournfang Brown
Flesh: Ratskin Flesh (Base), Reikland Fleshshade (Wash), Cadian Fleshtone (Drybrush)
Grey: Mechanicum Standard Grey

Image
Image
Image
Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Sat Oct 19, 2013 3:12 am

Back tumours are Carroberg Crimson with Agrax Earthshade

Image

Image

Shoulders and Blades: Base: Leadbelcher / Highlight: Runefang Steel strikes / Wash: Agrax Earthshade

Tongue: Base: Pallid Wych Flesh / Wash: Carroberg Crimson

Teeth: Base: Screaming Skull / Wash: Agrax Earthade

Raw Flesh: Wash: Carroberg Crimson

Sack: Base: Mournfang Brown / Drybrush: Skrag Brown / Drybrush: Karak Stone / Wash: Agrax Earthshade

The flesh on lower areas has been washed with Agrax to give shadows.

Stones: Base: Mechanicum Grey / Wash: Reikland Fleshshade / Wash: Agrax Earthshade

Need a bag of static grass to do the base, some Testor's Dullcote and he's done. I'm really pleased with him.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Mon Oct 21, 2013 5:02 am

Next Ysian Brute painted up in the same as before. The scales are Waagh Flesh, Drybrushed with Loren green followed by Cadaverous Green 46A (Foundry paints) given a wash of Athonian Camoshade and Agrax Earthshade

Image
joegabo
Posts: 4
Joined: Sat Sep 28, 2013 8:56 pm

Re: Chad's Ysians Autumn/Winter 2013

Postby joegabo » Mon Oct 21, 2013 2:30 pm

Hello,

Looking good. Didn't think those brutes were that big, wow next to the ax-men he looks beastly! (at least there is lots of room on the base to work with)

Take care,
Joe
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Mon Oct 21, 2013 8:13 pm

Cheer. The Kickstarter's killed my finances for a few weeks, I'm planning to use static grass, slate and other bits. Just need to buy them :) I hate having no cash.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Oct 22, 2013 10:18 am

The final Brute in progress.

Image

Image

I've been a bit too heavy handed with the Agrax on the metal. So going to drybrush a bit more on over the top of it.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Fri Oct 25, 2013 2:33 pm

Last of the Brutes.
Image
Image

The rags on the swords had a wash of Seraphim Sepia and a layer of Ushabti Bone
The bones are Ushabti Bone washed with consecutive layers of Athonian Camoshade followed by Seraphim Sepia. They were then given another drybrush of Ushabti Bone and a layer of Screaming Skull. The helmet horns had some Pallid Wych Flesh at the ends and upper sides.

The complete unit.
Image

Still have about 6 days before I get enough funds to get the stuff for their bases.

Next up Ax-Drunes.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Oct 29, 2013 10:16 am

"Here's Hedroc!"

Not finished yet. Details need picking out and the bones need work, but he's coming along nicely for a few hours work.
Image
Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Oct 29, 2013 12:25 pm

Hedroc's done. The only remaining part of my Encounter warband is 5 Ax-Drunes.

Image
User avatar
RayzrYR
Posts: 26
Joined: Tue Feb 26, 2013 2:40 am
Location: Central Coast, NSW, Oz

Re: Chad's Ysians Autumn/Winter 2013

Postby RayzrYR » Thu Oct 31, 2013 2:07 am

Hi Chad, looking good!
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Fri Nov 01, 2013 10:41 pm

Thanks :D

I've run out of Mournfang Brown so it's going to be a couple of weeks before I can get the Ax Drunes done completely. Until then I'll be just doing flesh and metal
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Wed Nov 06, 2013 6:02 pm

Yay for minor scratchcard wins :D I got the grass and Mournfang brown nice and early. I can get on with the Ax-Drunes properly!

The grass is Scorched Grass by Games Workshop, the tuft is a Mordheim Turf also from GW and the scree is Ash Grey from Army Painter. I'm quite pleased at how they've come out. It doesn't show up too well on Hedroc's base I think it's a little crowded but not too badly. Next time I'll be more half and half with the grass/scree ratio on the smaller bases.

Image
ImageImage
Image
Funkychef
Posts: 86
Joined: Mon Feb 25, 2013 2:42 pm
Location: Southampton, UK

Re: Chad's Ysians Autumn/Winter 2013

Postby Funkychef » Wed Nov 06, 2013 10:51 pm

I have to say, I was a little worried about the bases, those now look absolutely awesome, top job :)
Aka Dave
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Thu Nov 07, 2013 6:11 pm

Glad you like them :) What was the concern with the concept?

I've got the Ax-Drunes undercoated but it'll probably be tomorrow before I get to make a start on them properly.
Funkychef
Posts: 86
Joined: Mon Feb 25, 2013 2:42 pm
Location: Southampton, UK

Re: Chad's Ysians Autumn/Winter 2013

Postby Funkychef » Thu Nov 07, 2013 7:08 pm

Chad wrote:Glad you like them :) What was the concern with the concept?

I've got the Ax-Drunes undercoated but it'll probably be tomorrow before I get to make a start on them properly.


I missed this line in your second post

'Need a bag of static grass to do the base, some Testor's Dullcote and he's done. I'm really pleased with him.'

lol

Need to get my ass in gear do mine
Aka Dave
JohnnyJuice
Posts: 7
Joined: Tue Jul 30, 2013 6:43 pm

Re: Chad's Ysians Autumn/Winter 2013

Postby JohnnyJuice » Sat Nov 09, 2013 8:14 am

These look pretty good. I particularly like Muldo and Ugurd. The basing also suits your paint scheme well.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Nov 19, 2013 7:09 am

Arkham Origins has been a nightmarish distraction and I've only just pulled myself away from it :oops:

Still here's a base coated Mawgen (well the metals are a bit further on) I'm working with how I painted Hedroc.

Image

@Funkychef: I can see why you'd think the bases were a bit naff painted brown and left :D

@Johnnyjuice: Thanks very much, I'm really happy with Muldo he's currently my favourite. As for the bases I was really happy with them, so much so that I've started to buy up enough supplies to complete my gameboard and rebase my Death Guard.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Wed Nov 20, 2013 5:46 pm

The first finished Ax-Drune. I've been playing with GW's new blood effect, once I'm more comfortable with using it I may stain the axe blade of this guy and the others.

Image
Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Wed Nov 20, 2013 10:17 pm

Got Canan finished today as well. I'm feeling a bit tired now so I think my feet are going up and I'll watch some anime or something.

I'm really pleased with how the cloaks are coming out.

Image
Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Thu Nov 21, 2013 9:47 am

Busy day today so I might not get much done. Here's a WIP of Arthyen.

Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Thu Nov 21, 2013 11:06 pm

Image

Done. The rabbits need to be better but at the moment I don't think I can do them full justice. So a couple of thin layers and a wash for now.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Sun Nov 24, 2013 11:51 pm

Talan of Carn Maen completed.
Image
Image

Only the Bann-Ax-Drune left to paint.
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Nov 26, 2013 10:38 pm

Finished Talan and with it 500g of Ysian's!

Image
Image


Here's a pic of Ulric as I've been working on him to keep the flow of painting going whilst on Talan. He'll no doubt be part of my next 500g to expand the force to 1000g.
Image
User avatar
Chad
Posts: 52
Joined: Tue Feb 26, 2013 3:27 am
Location: Bury, Lancashire

Re: Chad's Ysians Autumn/Winter 2013

Postby Chad » Tue Nov 26, 2013 10:49 pm

A group shot of the encounter host. I'm really pleased with how they've turned out (If you notice Mawgen has sneakily changed his hip cloths to a matching red, which I think really improves the look of him).
The leather and flesh look I think really suits the Ysians.

Image

Return to “Tale of X Gamers”

Who is online

Users browsing this forum: No registered users and 0 guests