AndyS Trolls part 2 'It's hammer time!'

For Work in Progress blogs.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Thu Jan 09, 2014 12:50 pm

Sorry, couldn't resist.

So, a second Troll unit needs to be different. So hammers and some armour I think. Still in keeping with the Darklands look and trying to mimic Allan Carrasco's fantastic style as much as an amateur can!

Image
I sculpted a few hammer heads last year. Here is the first one now attached to a hand and sculpted haft. The head was magic sculp and the haft pro create. I found pro create hard, which made it difficult to work with, so I mixed it with magic sculp for the rest of the work.

Image
I tried to make the leather the same as Allan's work on Vortun. Not bad for my first attempt. Ever! The chain mail was sculpted as a flat sheet with a blunted pin then added to the model. I hope it looks better when painted!

Image
As you can see, I need to figure out how to sculpt the buckles next!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Thu Jan 09, 2014 1:09 pm

Andy, you should be proud - it's a very effective conversion, and I think it maintains Allan Carrasco's style exceptionally well, particularly on the weathering on the straps. I love it, and am eager to see what you do to the others!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Thu Jan 09, 2014 1:13 pm

Cheers mate. This one is still far from finished! lol. I'm in danger of adding too much I think. Need to kep some ideas back for the others!
Wyrd bið ful aræd
beefknee
Posts: 30
Joined: Mon Feb 25, 2013 5:48 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby beefknee » Thu Jan 09, 2014 1:45 pm

Really nice work Andy, fits in perfectly with the model. Can't wait to see it finished.
User avatar
wrinklestiltskin
Posts: 17
Joined: Thu Sep 05, 2013 7:31 am
Location: The interweb.nl

Re: AndyS Trolls part 2 'It's hammer time!'

Postby wrinklestiltskin » Fri Jan 10, 2014 6:54 am

Some great sculting there, didn't even notice everything that you sculpted at first. I'm eager to see how this develops.
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyP » Fri Jan 10, 2014 10:34 am

Cracking work there Andy, looks spot on, can't wait to see the rest :-)
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Mon Jan 13, 2014 12:43 pm

So I have done some more on the Troll. It's quite addictive! Sadly its slow progress as I'm learning as I go. I add and remove things and re-sculpt things.

Image
Here's the first arm with some armour plates added.

Image
Here's the back showing the buckles. At this size it looks like they need sharpening up. The mail 'skirt' has now been removed as I was unhappy with it. I will probably re-sculpt one later.

Image
The front shows a pouch, skulls and bones added from Vortun's necklace. The first stage of the shoulder plates is there too.

Image
Similar pic from the side.

Image
And one for Ryan! Darkside, my favorite brew at the moment!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Mon Jan 13, 2014 1:04 pm

I fully approve. That Dark Side looks amazing! Unfortunately I can't get Bath Ale on this side of the pond. Glad to see I'm being a good influence!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyP » Tue Jan 14, 2014 10:06 pm

Looking good, keep it up.
As I always say. At the end of the day.................it goes dark :-)
User avatar
wrinklestiltskin
Posts: 17
Joined: Thu Sep 05, 2013 7:31 am
Location: The interweb.nl

Re: AndyS Trolls part 2 'It's hammer time!'

Postby wrinklestiltskin » Wed Jan 15, 2014 6:54 am

I like the hammers on the troll even better than the original weapons.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Wed Jan 15, 2014 11:45 am

Cheers mate!

Image

I had these delivered today. Now I can get on with the rivits on the armour!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Wed Jan 15, 2014 12:17 pm

Andy, where'd you order them from? Those look perfect!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Wed Jan 15, 2014 12:27 pm

A UK company. Adhesive Dispensing Limited. The nozzles were cheap enough. £6 for the sample pack. But with postage and VAT it came to £15! with some which are just too small to use.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Thu Jan 16, 2014 8:08 am

Here are the arms, with finished hammers and armour.

Image
Wyrd bið ful aræd
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby grefven » Thu Jan 16, 2014 8:00 pm

I like it. Keep the sculpting up. It's gonna look ace.
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Slinky » Fri Jan 17, 2014 3:47 pm

Simply awesome stuff!

And Gem is my favourite beer of all time, by the way - the brewery is only 5 mins up the road from me ;)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Fri Jan 17, 2014 6:47 pm

Forgot you're a Brizzle boy Pete!
Wyrd bið ful aræd
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Slinky » Fri Jan 17, 2014 10:08 pm

Yarp ;)

Still yet to put a brush to any Darklands models, but they are next on my list :D
Malachi B.
Posts: 67
Joined: Fri Jan 17, 2014 4:36 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Malachi B. » Sat Jan 18, 2014 11:46 am

Cheers Andy, keep on sculpt in! I c u got lot of potential both in paintin and sculpt in seems.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Sat Jan 18, 2014 11:59 am

Cheers Mal. Nice to see you joined us at last! Looking forward to seeing your work!
Wyrd bið ful aræd
Malachi B.
Posts: 67
Joined: Fri Jan 17, 2014 4:36 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Malachi B. » Sat Jan 18, 2014 1:26 pm

Ahah I'll try mate, but currently can't find a "children works" section on this forums.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Sat Jan 18, 2014 1:30 pm

Let us know what help you need mate. We'll be happy to!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Sat Jan 18, 2014 2:06 pm

Malachi, the advantage to a forum like this is that its primarily loaded with hobbyists who know the processes required. I can't sculpt nearly as well as anyone Moerce even considers hiring, but I know what the steps in the process are; I just don't have the control to do them right. I know the progression of paint layers to shade the models, but don't have the skill to get them to the right place.
That said, everyone on the Mierce forum is here to represent Darklands the best way we can, rather than compete with each other. I was thrilled by how much of the WAMP contest was guys telling each other how they made cool effects and promoting someone else's models instead of their own. Usually that isn't the case when there's a competition. More than that, anyone who wants to get to the next level would do well starting here - people are honest with their opinions and offer great constructive criticism, even when something Is amazing but could be just a bit more perfect (heck, look at the Mierce supporters who asked for improvements to an amazing professionally done sculpt!
I know I get more here from one, "It's good mate but the gold is just a bit too yellow," than I do from the 200 people who've watched my painting & modeling thread on Dakka.
If you want to get better, post here and ask for feedback! It'll hurt the ego at first, but that's how we improve!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Sat Jan 18, 2014 2:25 pm

Nicely put Ryan.
Wyrd bið ful aræd
Malachi B.
Posts: 67
Joined: Fri Jan 17, 2014 4:36 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Malachi B. » Sat Jan 18, 2014 4:22 pm

Oh, I will be glad to post pics and receive the right amount of criticism bout my works here folks. That's what I would expect to improve me :-) This begin said, is already a miracle I can write something in this forum for now, cause believe me, computer is totally a hard subject for me. U can imagine what will be to learn making and post in photos :-) . Anyway sorry for bein out of subject, this is Andy's whip thread.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Mon Jan 20, 2014 1:02 pm

So I've put the bad boy together. Rejected the idea of putting armour on the legs. It just didn't look right. The shoulder plates are not finished, but I thought attaching the head and arms would help get it right.

I need some advice from you guys, on the length of the hammer handles. Are they OK or should they be shortened? Or maybe they need to be broken up with some strapping?

Image
Image
Here's the original for comparison.

Image
And a side by side.


Please comment!!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Mon Jan 20, 2014 2:37 pm

I love how it looks! I think the handle length is OK; the overall weapon length is comparable to the cleavers they're using, and a Troll probably has the strength to swing from near the bottom of the handle. I would encourage doing wraps on the handles though, just for the sake of consistency. All the other troll weapons look like they have a strap on at least one of them, so it would make sense that the hammers would as well.
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
wrinklestiltskin
Posts: 17
Joined: Thu Sep 05, 2013 7:31 am
Location: The interweb.nl

Re: AndyS Trolls part 2 'It's hammer time!'

Postby wrinklestiltskin » Mon Jan 20, 2014 2:48 pm

I think the hammer length is fine.
I don't want to be that guy, but personally I think the size of the hammer heads is more in line with GW scale/style than with Mierce's "true" scale. It's just that to me they come across as being a bit too large compared to the proportions of rest of the miniature.
I hadn't noticed it in the earlier pictures and I hate saying something like that when a miniature is finished. But in the end it is a personal opinion, so I hope you don't feel bad about it.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Mon Jan 20, 2014 2:54 pm

I did base the length on the cleavers, but the handles were looking long. Maybe the straps will help! Pauldron and straps tonight then!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyP » Tue Jan 21, 2014 10:58 am

Probably too late now. However, i think straps will improve things greatly but you may still need to shorten the handles, they do seem a bit on the long side to me. Great looking work though, can't wait to see a full unit :-)
As I always say. At the end of the day.................it goes dark :-)
Aniku
Posts: 80
Joined: Mon Apr 08, 2013 9:47 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Aniku » Tue Jan 21, 2014 11:19 am

This is A FANTASTIC WORK!!! Congratulations for your sculpts...

As wrinklestiltskin said I think the left hand hammer length is fine. The right one looks like perfect for me. The chainmail looks beautiful too.

You havve create a diferent troll and that is so cool.

Many thanks.

Mariano.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Tue Jan 21, 2014 11:31 am

Thanks for your input guys. I'm trying the straps first and I'll see how that goes.

Wrinklestiltskin, Mierce 'true scale'? The Duguth maybe (edit - the spear heads are the size of sword blades still!), but I beg to differ on anything Ysian. Troll cleavers are huge, Erik's axe, Carrowek's axe....need I go on? True, my hammers are larger than Gamla Bror's, but I wanted something to match the cleavers for size. I think ,at least I'm trying to, match Mierce style!
Wyrd bið ful aræd
User avatar
wrinklestiltskin
Posts: 17
Joined: Thu Sep 05, 2013 7:31 am
Location: The interweb.nl

Re: AndyS Trolls part 2 'It's hammer time!'

Postby wrinklestiltskin » Tue Jan 21, 2014 2:54 pm

Haha you are right, I had forgotten about the Ysians. I was thinking more along the lines of Tarvax and Sronax (fomoraic in general) compared to GW Minotaurs. Those miniatures hit a nerve with me, Ysians not so much (except Uggurd) so I guess I blacked those out. Ever since I picked up a few Mierce miniatures, I've started to dislike GW miniatures more and more with its unrealistic proportions. I know Mierce miniatures is not exactly true scale, especially not across the whole line, but the miniatures are closer to realism in a way that I like.

I find it difficult to express myself in writing, but I should have put a bit more effort in to confey what I meant (in English). Sorry about that.
Anyways I love what you did with the miniature. The hammer scale critisism overshadows how much I like it and in the end it's a matter of taste.

Can't wait to see the painted result.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Tue Jan 21, 2014 3:12 pm

Thanks mate. As I said, all criticism is welcome!

I appologise for the 'true scale' rant!

I think I'll keep the heads the same size. They will be in stone, not metal, another justification for making them so large maybe! I will probably purchase a razor saw on the way home. Cut the handles down a little. hopefully they won't look so much like lollypops on sticks then!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Tue Jan 21, 2014 3:53 pm

Yea, I recommend anyone intending to cut parts off make the investment in a jeweler's saw or a razor saw. I've snapped enough pieces with sprue cutters and knives (not to mention making myself bleed) because of the brittle quality of resin. Learn from my blood! Pay the £5.00 or $7.75 for a few good saws!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Tue Jan 21, 2014 5:20 pm

£8.50! But it works!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Wed Jan 22, 2014 8:15 am

OK, so I purchased the razor saw and removed about 4mm from each handle. I think I'm happier with the length now. Thanks for all the comments guys!
I added strapping to one of the handles and have made progress with the shoulder pauldron. Let me know what you guys think. If there anything else you'd like to see? On this or one of the other Trolls?

Image

Once the pauldron is finished I think he's done!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Trolls part 2 'It's hammer time!'

Postby razormage » Wed Jan 22, 2014 12:34 pm

If you've got access to really fine hobbyist's chain, I think it would look awesome to run some from his shoulder pauldron to those rings piercing his neck folds. I'd always wondered about the functionality of those...
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyP » Wed Jan 22, 2014 6:10 pm

Great improvement on the hammers, strapping looks good too. Awesome work. You've inspired me to buy some magic sculpt and have a go at some customisation.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Wed Jan 22, 2014 6:22 pm

I'm using a magic Sculp and pro create mix for most parts. Soft and sticky!
Wyrd bið ful aræd
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Slinky » Thu Jan 23, 2014 9:53 am

Looking v good. It won't be long before Mierce call you up to sculpt models - Will you be ready for KS3? ;)
Aniku
Posts: 80
Joined: Mon Apr 08, 2013 9:47 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Aniku » Thu Jan 23, 2014 10:41 am

The changes really work. Look likes much better now!!
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Thu Jan 23, 2014 10:49 am

I can dream Pete, I can dream!
Wyrd bið ful aræd
User avatar
Alpharius
Posts: 23
Joined: Thu Aug 22, 2013 12:09 am

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Alpharius » Sun Jan 26, 2014 11:45 pm

Those hammer conversions look amazing!

So much so that you've now got me wishing that Mierce would 'officially' make and release weapon options for the trolls so that mine could have hammers too!
Nil nos tremefacit.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Mon Feb 10, 2014 1:04 pm

Just a couple of pics of the second Troll. Still early days!
Image

Image

Getting there!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Tue Feb 11, 2014 1:06 pm

More work on the actual hammers yesterday. I decided the easiest way was to make a rough block of putty, let it cure, then sand and carve it into shape.

Image

Image

I have cut off one of the original straps on the arms and added new ones closer to the wrist. For the armour to attach to.
Wyrd bið ful aræd
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby Slinky » Tue Feb 11, 2014 2:31 pm

Looking v good again 8-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Fri Feb 14, 2014 3:36 pm

Totally forgot to do this lunchtime, so just some pics!

Image

Image
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls part 2 'It's hammer time!'

Postby AndyS » Mon Feb 17, 2014 12:43 pm

Here's what I did with the second Troll this weekend. Chainmail and armour plates.

Image

Image

Still a way to go on the armour but so much better than the first one I think. So I ripped the plates and mail off of that one and started again!

Image

Image

Sorry, a bit blurry but you get the idea. Already feel better about it!
Wyrd bið ful aræd
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Trolls part 2 'It's hammer time!'

Postby grefven » Mon Feb 17, 2014 9:53 pm

Great stuff. :)

Return to “Work in Progress”

Who is online

Users browsing this forum: No registered users and 7 guests