AndyS Angelcynn WIP

For Work in Progress blogs.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

AndyS Angelcynn WIP

Postby AndyS » Wed Oct 23, 2013 12:08 pm

Image
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Wed Oct 23, 2013 8:13 pm

Nice, never thought of using wheatabix to mount he minis on :-)
How do the PK holders hold the minis on?
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Oct 24, 2013 11:24 am

Andy, you pin them into the cork.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Oct 24, 2013 11:26 am

Oh, those are version 1 holders from Stephan Rath. version 2 have a split cork to clamp the pins in I hear.
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Thu Oct 24, 2013 2:05 pm

Oh right, so its just a cork base then. Didn't look like it it was cork :-)
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Oct 24, 2013 2:48 pm

It's a cork insert in a ceramic base. very nice to hold I must say!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Thu Oct 24, 2013 6:00 pm

Hmmmm, may have to invest in a couple.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Wed Dec 11, 2013 8:40 am

So, inspired by Bohun's Duguth I had a little go last night, most of this was done a few weeks ago and left. But last night I got of my ass to do some more!

Image

Image

Image

Image

Still lots to do. But hopefully the painting funk is over!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Dec 17, 2013 11:12 am

Nice work so far, loving the feel of the colour scheme.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Dec 26, 2013 3:48 pm

Cheers Andy. I'm blatantly following Rob's guidelines!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Fri Jan 03, 2014 1:52 pm

No shame in that. I generally follow studio colour schemes anyway. Must put the effort in and crack on with my trolls, not touched a brush since the wamp comp ended.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Fri Jan 03, 2014 3:51 pm

Yeah, I'm struggling too. May abandon these for a bit and convert my troll unit. Or build blood maw!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Angelcynn WIP

Postby razormage » Fri Jan 03, 2014 4:11 pm

I'm still painting, but I'm stuck fixing things for my WHFB O&G army for the US Masters, so I'm not painting Mierce stuff at the moment. Let me tell you, after months of Mierce-only, Hordes models are OK to paint, but Mantic models are painful! All the details just seem so flat!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Fri Jan 03, 2014 4:22 pm

I've never painted any. The last non mierce I painted was ax faction troll hunter. That's a nice model. Also halfway through their bear rider. Got distracted by trolls then!
Wyrd bið ful aræd
User avatar
razormage
Posts: 147
Joined: Mon Feb 25, 2013 3:09 pm
Location: San Antonio, Texas
Contact:

Re: AndyS Angelcynn WIP

Postby razormage » Fri Jan 03, 2014 4:55 pm

I've got about a day left on these "Fleabag Riders," then I move on to Mierce trolls this weekend!
--Ryan Smith
Blog: http://thebeerwaaagh.blogspot.com/
Twitter: @beerwaaagh
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Mon Feb 24, 2014 12:50 pm

So it's been a while since I worked on these guys. They've been giving me the evil eye since I started playing with the Trolls. But 2 Trolls are converted enough now so i decided I should do some more.
The problem was I was not happy with the way they were going. These guys are small! smaller than Meloda even and the details are very fine. I was not happy with the skin, beard or red cloaks. So all of it really!
I began fixing these problems with a glaze of Foundy meditteranean flesh shade and a glaze of good old blood red for the cloaks. I was happier with these results!

Image
Image

Oh, and if in doubt, work on the bases! Always motivates me for some reason!

From there I just ploughed on. There is more work to do of course. here is where they are now.

Image
Image

Oh, i broke one at the ankle while painting! I've not managed to avoid that after all!
Wyrd bið ful aræd
Malachi B.
Posts: 67
Joined: Fri Jan 17, 2014 4:36 pm

Re: AndyS Angelcynn WIP

Postby Malachi B. » Tue Feb 25, 2014 8:52 am

They are coming g out very good! As always clean paint job, these minis are small and photos are near, cheers
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Feb 25, 2014 9:34 am

These guys look great. You needn't worry about what's wrong with them as you are the only one that will notice. They are great looking pieces.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Feb 25, 2014 10:36 am

Cheers guys! here's the latest pic. Titled 'why I dont paint freehand!'

Image

Looks like you'll need to open it up to see why!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Feb 25, 2014 11:25 am

There is nothing wrong with that. It is just the style of design I would expect to see on an infantryman's shield. Looks good
Last edited by AndyP on Tue Feb 25, 2014 8:07 pm, edited 1 time in total.
As I always say. At the end of the day.................it goes dark :-)
beefknee
Posts: 30
Joined: Mon Feb 25, 2013 5:48 pm

Re: AndyS Angelcynn WIP

Postby beefknee » Tue Feb 25, 2014 8:05 pm

Shield design look very good, don't be so hard on yourself :D
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Feb 25, 2014 9:15 pm

Cheers guys. Will have the (possibly) final pics up tomorrow.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Wed Feb 26, 2014 12:51 pm

here are the latest (of finished, not sure yet) pics. The spear shaft is plain, I may shade it up a bit yet.
Image
Image

below is a scale shot next to Erik, so you can see how small these guts really are. I hope the Gesith are a bit larger!
Image
Wyrd bið ful aræd
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Angelcynn WIP

Postby grefven » Wed Feb 26, 2014 4:03 pm

Wooo! That is a HUGE difference. I know that Eirik is supposed to be large, but goddamn...! :)
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Angelcynn WIP

Postby Slinky » Wed Feb 26, 2014 5:09 pm

I think consistency of scale is something that needs some improvement. Comparing Penda on horse to the Duguth he is going to lead into battle, the difference is quite striking.
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Wed Feb 26, 2014 5:10 pm

Yeah, Penda has the same size difference. Still not sure about it myself. Hopefully they will look ok together on the battlefield
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Wed Feb 26, 2014 6:49 pm

How do Duguth compare to Drune axemen and bowmen? Anyone have a pic of them together?
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Wed Feb 26, 2014 7:37 pm

Ask and you shall receive
Image
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Wed Feb 26, 2014 8:35 pm

Cheers Andy. Not too small then. But more realistically proportioned!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Wed Feb 26, 2014 9:19 pm

Drunes are slightly bigger but only in an Arnie versus normal human kinda way. Kraan, Eiric and Penda, however, are like Xerxes from 300 :-)
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Wed Feb 26, 2014 9:33 pm

Yeah, one touched by his god, one part wolf and the other just bloody huge!
Wyrd bið ful aræd
Tim Fisher
Posts: 76
Joined: Fri Feb 15, 2013 2:47 pm

Re: AndyS Angelcynn WIP

Postby Tim Fisher » Fri Feb 28, 2014 4:27 pm

Regarding scale it's something we keep a very close eye on.

We have different categories for humans

'regular guy/gal' these are between 28-32mm to the eye - 30mm to the eye (when stood up, crouched etc will differ) is, to us a six footer (yes we know people were smaller than, doesn't matter it's all relative a taller person is taller) so a warchief for example would be 30-32mm to his eyes - these would be big lads! The Albainn and Brythoniad humans are much the same - these are all 'normal' humans. Men, of course are usually taller than women, though that doesn't mean that all men are taller than all women!

'super-human blokes' for want of a better phrase off the top 'o' me head. The Fomoraic humans are largely imbued with power from Baalor - Kraan is a good example, he's a massive warlord but Maagan and Tundaar are all head and shoulders above normal people. . Carrowek is a Drune Warlord (and see below, the Drunes are big anyway) with a questionable birth history......... ;0) Eirik is just freakishly large, we figure that you get one of these man-giants in a generation (think of freakishly tall basketball players like these guys http://www.businessinsider.com/really-t ... rs-2011-11 ) and he would naturally be an able warrior and leader of men. Penda, of course is a werewolf - look at the size of Cearl in the pic above, that's a full on Waelwulf - later you will see (smaller) Werewulfs. Penda is between a man and a Werewulf. So he's bigger and much more powerful as a result. Erebius, will also be taller than a normal Joe (he has a daemon inside him!)

Bulk-wise Drunes are much bigger than a regular guy. The way we see it the Duguth are just normal blokes that you would walk past in the street, an average Drune warrior is someone you would walk past at a Mr Universe gathering, they're still human but maybe they've 'had some help'. Andy has it right with the Conan comment - they're big lads!

Hope that helps with regards to the scale - at the mo it looks slightly skewiff because perversely we have more big guys than little guys (mainly because we started working mainly on Ysians and Fomoraic and we have loads of monstrous infantry too) - though with the new characters coming through and new units planned (Gesith, Legionaires) and hopefully some to soon be funded (such as the Teulu) the pendulum will swing back so the big guys look big rather than average! Though the Gesith will be a bit bigger than Duguth - they're the elite!
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Angelcynn WIP

Postby grefven » Fri Feb 28, 2014 8:43 pm

I guess that working with a lot of different sculptors can't make the scale very easy, either, which is understandable. :)
Tim Fisher
Posts: 76
Joined: Fri Feb 15, 2013 2:47 pm

Re: AndyS Angelcynn WIP

Postby Tim Fisher » Mon Mar 03, 2014 10:03 am

Well scale in terms of height is easy enough as we have steel rulers in all the early WiPs.

Scale in terms of bulk is more difficult - though where possible we assign certain sculptors to certain ranges/races. For example Juan and Olivier both sculpt very fine in an almost true-scale (apart from weapons we often boost them up a little) so we assign them to the 'real world' humans such as the Anglcynn, Brtythonniad, Albainn humans. Stephane Simon is great at 'exageratting the mass' he loves his big, hulking dudes so we usually assign him to the Drunes as a rule (Leofwen aside though she was something of a rescue effort and turned out great) he is also ideal for your big, bearded blokes like Gesith and Holumen.

We also always send sculptors reference minis to work from and also we always send a sculptor a copy of evey mini they sculpt for us so they have a reference of their own back catalogue (plus it's a nice thing to do and they can take them to shows etc)


Now we're trying 3d it makes sense to use 3d for the snake sculpts - all those scales and underbellies are ideal for this method. Plus I think I made Stephane slightly insane from all those scales he had to sculpt individually by hand! :0P


Before we assign a sculpt we always look at a sculptor's style and versatility. I would say our 'hit ratio' is excellent, especially when you take into account that we have humans and 'humans plus' in Darklands.
Malachi B.
Posts: 67
Joined: Fri Jan 17, 2014 4:36 pm

Re: AndyS Angelcynn WIP

Postby Malachi B. » Thu Mar 20, 2014 8:49 am

This was interesting
Blindside
Posts: 10
Joined: Thu Oct 03, 2013 12:39 pm

Re: AndyS Angelcynn WIP

Postby Blindside » Sat Mar 22, 2014 11:34 pm

Interesting to hear the sculpt decisions and the scale ideas. It does make sense in many ways!
Andy, some spectacular painting! Why is it that mierce minis all seem to be painted by very talented people? Never heavy handed poor eye sighted souls like myself!??
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Sun Mar 23, 2014 9:10 am

Mierce minis are of a quality where they make even basic paint Jobs look great. That said, there are some fantastic painters on here. Andy S being one of them :-)
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Apr 01, 2014 11:57 am

Well I've been gradually making progress on the command trio for these guys. I'm actually surprised that I haven't posted anything on them before! maybe because its basically just more of the same.
One thing I will say is regarding the Reaper paints. They have NO rub resistance. The paint comes off of raised areas very badly when touched. Making painting a bit of a pain for ham-fisted folk like me!

Here are some pics anyway!
Image

Image

Image

They're starting to come together now, with the bases and shields started.

More soon!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Apr 01, 2014 12:08 pm

Looking great. Can't wait to see the full unit lined up.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Apr 01, 2014 12:10 pm

Man.....you want another 5 warriors done???...... ;-)
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Apr 01, 2014 12:11 pm

Well I meant a five man unit including the three command figures, but if you're offering ;-)
As I always say. At the end of the day.................it goes dark :-)
staggerlee
Posts: 82
Joined: Thu Sep 26, 2013 12:28 pm
Location: Norway

Re: AndyS Angelcynn WIP

Postby staggerlee » Tue Apr 01, 2014 12:12 pm

Good color scheme with nice contrast. Looking forward to see more!
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Apr 01, 2014 12:17 pm

I'm torn between ploughing on with the other 5 and painting Penda. Or maybe Bloodmaw? Something big!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Tue Apr 01, 2014 12:37 pm

I'd be interested in seeing what you do with Bloodmaw. Hrudinn not taking your fancy yet?
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Apr 01, 2014 1:43 pm

not really Andy. I prefer the ground based models.
Wyrd bið ful aræd
devilution
Posts: 8
Joined: Tue Sep 24, 2013 9:40 am

Re: AndyS Angelcynn WIP

Postby devilution » Tue Apr 01, 2014 7:52 pm

Could you do a quick tutorial on your basing? I don't know why but I think they are amazing !
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Tue Apr 01, 2014 8:36 pm

Yeah. When I next do some bases I'll do that.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Apr 03, 2014 12:18 pm

Just one pic of the champion's shield today.

Image

Base half done.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Angelcynn WIP

Postby AndyS » Thu Apr 03, 2014 12:19 pm

bloody mould line on the sword crossguard dammit!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Angelcynn WIP

Postby AndyP » Thu Apr 03, 2014 1:08 pm

Always trust a photo to highlight a fault :-)
As I always say. At the end of the day.................it goes dark :-)

Return to “Work in Progress”

Who is online

Users browsing this forum: No registered users and 5 guests