AndyS Trolls WIP

For Work in Progress blogs.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

AndyS Trolls WIP

Postby AndyS » Mon Mar 04, 2013 1:21 pm

So here is my first ever WIP post!

The Trolls have been undercoated with Citadel black spray with white over the top. Small bursts at approx 45 degree angle and a little from below. This really brings out the detail!
My airbrush set arrived today, now I just have to wait for the paint and get some practice! I'm hoping that the tones of the undercoat will show through the airbrushed basecoat to help with shading.

ImageImage

ImageImage

That's it for now. I'll keep you posted!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Mon Mar 04, 2013 1:38 pm

Nice. I really can't wait for my trolls to come :-)
Looking forward to seeing how you get on with the airbrush since I'm looking at getting the same one.
As I always say. At the end of the day.................it goes dark :-)
bloodwars
Posts: 80
Joined: Mon Feb 25, 2013 9:17 pm

Re: AndyS Trolls WIP

Postby bloodwars » Mon Mar 04, 2013 2:26 pm

yeah, i couldn't not get the norse starter, so i can't wait to see how these go.
bloodwars
Posts: 80
Joined: Mon Feb 25, 2013 9:17 pm

Re: AndyS Trolls WIP

Postby bloodwars » Mon Mar 04, 2013 2:27 pm

oh yeah, can you stick a space marine next to him for scale? if you don't mind that is.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 04, 2013 3:09 pm

I don't have any Space marines mate! lol
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 04, 2013 3:12 pm

I can do a human. Kara Black (Kara's last stand) or Meloda.
Wyrd bið ful aræd
User avatar
RayzrYR
Posts: 26
Joined: Tue Feb 26, 2013 2:40 am
Location: Central Coast, NSW, Oz

Re: AndyS Trolls WIP

Postby RayzrYR » Tue Mar 05, 2013 2:23 am

Ahh c'mon, everyone should have at least one space marine, even if just for scale purposes... :geek:
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 05, 2013 6:58 am

I owned the original and the original plastic set but that's it. Never really liked 40K.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Thu Mar 07, 2013 12:57 pm

I have some more pics here showing the black and while undercoat.
Image

Image

And a scale shot with Meloda
Image
My airbrush and Model Air paints have now arrived so I hope to tinker at the weekend. maybe even put some colour on the Trolls!
Wyrd bið ful aræd
User avatar
zedmeister
Posts: 131
Joined: Mon Feb 25, 2013 2:26 pm
Location: Mercia, UK
Contact:

Re: AndyS Trolls WIP

Postby zedmeister » Thu Mar 07, 2013 1:09 pm

Make sure you use a respirator with that airbrush if you're in a confined space bud...
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Thu Mar 07, 2013 1:10 pm

Who doesn't want green lungs?! ;)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Thu Mar 07, 2013 1:21 pm

I had a little test yesterday, there's not a lot of overspray so I should be fine.

Thanks for your concern though guys! :D
Wyrd bið ful aræd
bloodwars
Posts: 80
Joined: Mon Feb 25, 2013 9:17 pm

Re: AndyS Trolls WIP

Postby bloodwars » Thu Mar 07, 2013 2:54 pm

troll big. troll smash.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Fri Mar 08, 2013 12:46 pm

OK, so I couldn't wait to get started with the airbrush once my paints had arrived. So with minimal practice I dived in with something I hoped would be easy. Or at least easy to fix if I messed up!

The Troll Vane!

Image

This was first airbrushed with vallejo canouflage black brown, then burnt umber and finally bright brass. All thinned with vallejo thinners at around 30%.
I think it's a reasonable base to start the highlights and weathering.

Next stop Troll flesh!
Wyrd bið ful aræd
User avatar
Slinky
Posts: 148
Joined: Mon Feb 25, 2013 3:54 pm

Re: AndyS Trolls WIP

Postby Slinky » Sat Mar 09, 2013 9:35 pm

Oh, wow.

I have a set of Trolls coming, I hadn't realised quite how HUGE they are.

Even more excited now :)
Darq Hunter
Posts: 11
Joined: Mon Feb 25, 2013 7:36 pm

Re: AndyS Trolls WIP

Postby Darq Hunter » Mon Mar 11, 2013 6:10 am

These guys are massive! My Angelcynn look so tiny compared to that Troll. I can't wait to see more in progress pics.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 11, 2013 8:20 am

You're in luck Mercedes, next pics up now!

I base coated the trolls with Model Air Field Green and U.S. Light Grey on the belly.

Image

Then I continued with the standard bearer. Working into the flesh a little more to make the colour a little darker and blend the green and grey.

Image

I think the most difficult part will be the trolls back. I have added some shadows but it's a large area and needs lots more work!

Image

I also need to experiment more with the airbrush. find the happy medium between a good solid coverage and letting the 2 stage undercoat show through. All of the green is still quite light and nees to be a little darker and more solid. Something to do tonight!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Mon Mar 11, 2013 10:10 am

Those look really good so far. If that's the result from a budget airbrush, compressor and a small amount of practice then I'm definitely ordering one today. Do you know the model number of the airbrush that came with your compressor?
Never mind, I checked your link in ks comments and it says the model in there.
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 11, 2013 10:46 am

It comes with 2 airbrushes. I was using the side/gravity fed one with 0.3mm nozzle.
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Mon Mar 11, 2013 11:08 am

Thanks
As I always say. At the end of the day.................it goes dark :-)
grefven
Posts: 149
Joined: Mon Feb 25, 2013 6:26 pm

Re: AndyS Trolls WIP

Postby grefven » Mon Mar 11, 2013 11:28 am

The front looks really promising, and I agree that the back will be the most challenging, simply because it's such a big area with not too much details, so it could end up looking a bit flat. But I really dig the front thus far. :)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 11, 2013 11:42 am

Cheers Gref! :D
Wyrd bið ful aræd
bloodwars
Posts: 80
Joined: Mon Feb 25, 2013 9:17 pm

Re: AndyS Trolls WIP

Postby bloodwars » Mon Mar 11, 2013 12:25 pm

love it, can't wait to see it completed.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Mon Mar 11, 2013 12:37 pm

It won't be fully completed until I get the plastic base through with my first starter shipment :(
Wyrd bið ful aræd
User avatar
Azhrarn
Posts: 72
Joined: Mon Feb 25, 2013 4:14 pm
Location: the Netherlands

Re: AndyS Trolls WIP

Postby Azhrarn » Mon Mar 11, 2013 8:20 pm

Considering you're an airbrush novice (and with many of us looking to get one) you're a great advertisement for those things. :D
That troll looks really nice, you can really see the effect of the dual primer coat, which I hadn't really expected.

Thanks for showing your work in progress, keep it up. :lol:

Also : Trolls are bloody massive. :shock:
Glad I have some Dragonkin and Rhinomen coming. ;)
War Beckons, and I Answer
Dalthius
Posts: 15
Joined: Mon Feb 25, 2013 6:04 pm
Location: Fort Worth, TX

Re: AndyS Trolls WIP

Postby Dalthius » Tue Mar 12, 2013 12:05 am

Most impressive! My airbrush arrives Thursday. What did you use to cover the trolls belts when you sprayed? I've got so much to learn. I'm planning on using my airbrush to double prime, much like you did. Since I'll be using a darker green (vallejo tank green) would you recommend I thin it? It's air paint.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 6:54 am

I didn't mask anything so the belts got some green on them. I used around 30% thinners. I found hard buying the paint on the net as they are shown as a light to dark shade. Difficult to tell the colour. Let us know how the tank green goes.
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 9:33 am

I can't find tank green in the model air range. The field green I used is quite dark on the chart but looks quite vibrant over the white!
Wyrd bið ful aræd
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Tue Mar 12, 2013 9:58 am

Number 71011 is Tank Green.
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Tue Mar 12, 2013 10:02 am

Mmm, looking at the Tank Green I have at home, it might be a bit to dark for the trolls. It's close to Olive Green as a color, so there's some brown in there
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 10:26 am

Ah, that comes up as Armour green on the online chart.
Wyrd bið ful aræd
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Tue Mar 12, 2013 10:30 am

I got the full VMA-box here at home, so if you need a more accurate description of a color you just ask and I'll take a look
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 10:37 am

Cheers Rick!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Tue Mar 12, 2013 12:16 pm

Quick question Andy. Did you buy your VMA paints individually or go for one of the box sets? If box set which one?
As I always say. At the end of the day.................it goes dark :-)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 12:31 pm

I didn't get a set. Just 10 pots for £21 on ebay.
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Tue Mar 12, 2013 12:33 pm

OK cheers. Seen the same listing, I think I'll have to have a think what colours I'll need. :-)
As I always say. At the end of the day.................it goes dark :-)
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Tue Mar 12, 2013 12:58 pm

You could also go for the full set, it includes a very nice case with place for all your paints ;)
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Tue Mar 12, 2013 1:10 pm

Substantially more expensive though I think Rick!
Wyrd bið ful aræd
User avatar
AndyP
Posts: 304
Joined: Mon Feb 25, 2013 2:31 pm
Location: Stoke on Trent, Staffordshire, UK

Re: AndyS Trolls WIP

Postby AndyP » Tue Mar 12, 2013 1:44 pm

Having just bought the VMC 72 paint set, a compressor, airbrush, thinners, primer & cleaner I could do without forking out for another full set. And that doesn't include the huge Darklands order. :-D I'm so dead when the wife finds out ;-)
As I always say. At the end of the day.................it goes dark :-)
Dalthius
Posts: 15
Joined: Mon Feb 25, 2013 6:04 pm
Location: Fort Worth, TX

Re: AndyS Trolls WIP

Postby Dalthius » Wed Mar 13, 2013 3:50 am

I opted for the tank green because it looked lighter than the dark green on the website. I'm looking for a duller green than what Andy has, maybe almost like a grey/green, and I may do my trolls with slight variations in their skin tones. Not sure yet. Painting them all the same seems....blah. besides, we aren't all the same skin tone, are we? ;) I'm also thinking doing one in a bluish-grey. But I'm definitely glad I got an airbrush, that'll help with these big fellas. I ordered a small paint set from thewarstore.com and may get more. They were out of black primer though :/
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Wed Mar 13, 2013 8:12 am

To be honest the Field Green used is lighter and more yellow than expected. I am dulling it down with dark green glazes and leaving the brighter green as highlight. Seems to be a slow process! I have started painting other areas in order to get a better feel for the whole model. From doing that it is clear that I need to add more contrast into the trolls flesh, but not as much as one would normally have on a 30mm human.

More pics soon!
Wyrd bið ful aræd
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Wed Mar 13, 2013 10:46 am

has anyone used the Model Air matt varnish? How does it compare to Army Painter anti-shine?

Don't worry. Looks like it's the same across all ranges now. Not very matt in my experience.
Wyrd bið ful aræd
Tim Fisher
Posts: 76
Joined: Fri Feb 15, 2013 2:47 pm

Re: AndyS Trolls WIP

Postby Tim Fisher » Wed Mar 13, 2013 2:24 pm

Testors Dullcote or go home for me.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Wed Mar 13, 2013 2:31 pm

I use dullcote for display. But it's not at all protective. I'll have to use a varnish first, maybe vallejo, then dullcote over the top. Who knows, I may want to have a game with these at some point!
Wyrd bið ful aræd
Rick_Boer
Posts: 185
Joined: Mon Feb 25, 2013 3:34 pm

Re: AndyS Trolls WIP

Postby Rick_Boer » Wed Mar 13, 2013 3:56 pm

I use the Vallejo gloss varnish through the airbrush as my protective layer. Then a spray of testor's and you're done ;)
Tim Fisher
Posts: 76
Joined: Fri Feb 15, 2013 2:47 pm

Re: AndyS Trolls WIP

Postby Tim Fisher » Wed Mar 13, 2013 4:16 pm

I know a guy (JY-Y) who has an awesome varnishtutorial. I'll see if i can dig it up.

I usually gloss first then testors. Though I'm not a fan of what testors (or any matt varnish) does to metals.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Wed Mar 13, 2013 4:43 pm

Army painter claim that their varnish keeps the look of the metal. I've used it but the nozzle clogged up with nearly a full can left! Other than that I thought it was good.

So 3 lovely new Trolls......
Wyrd bið ful aræd
judgedoug
Posts: 12
Joined: Mon Feb 25, 2013 3:03 pm

Re: AndyS Trolls WIP

Postby judgedoug » Wed Mar 13, 2013 7:27 pm

AndyS wrote:Army painter claim that their varnish keeps the look of the metal. I've used it but the nozzle clogged up with nearly a full can left! Other than that I thought it was good.

So 3 lovely new Trolls......


Try turning it upside-down and spraying; that cleared my clog. Another clog I cleared by taking off the nozzle and soaking it in hot water for a few minutes then spraying upside down.
User avatar
AndyS
Posts: 403
Joined: Mon Feb 25, 2013 4:53 pm
Location: Trowbridge UK

Re: AndyS Trolls WIP

Postby AndyS » Wed Mar 13, 2013 7:59 pm

I soaked that nozzle in everything I could think of! I always invert and spray after use, no idea why it clogged.
Wyrd bið ful aræd
Dalthius
Posts: 15
Joined: Mon Feb 25, 2013 6:04 pm
Location: Fort Worth, TX

Re: AndyS Trolls WIP

Postby Dalthius » Wed Mar 13, 2013 11:50 pm

Crap didn't even think about sealing/protecting
Last edited by Dalthius on Fri Mar 15, 2013 1:55 am, edited 1 time in total.

Return to “Work in Progress”

Who is online

Users browsing this forum: No registered users and 2 guests