My Mierce work

To show off your finished work
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:17 am

Well, I finally got of my lazy backside and threw together a few clumsy photos of my average painting examples for you all to see.
Note that whatever else, my photography is actually worse than my painting ability...
I slapped down some paper towel on the kitchen bench, and snapped these with my S7 Edge (Not the explody S7), no expense spared!
I then spent 10 times as long cropping them all!

You'll notice very few have survived without some minor changes...whether a new weapon, or more significant mod...I seldom paint as is...
Mostly I attach fewer accouterments, as they tend to fall off.
However, first I have to say:
Image
Last edited by yxalitis on Sun Oct 16, 2016 7:57 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:25 am

Beast of Fortriu (It's a chimera, OK!)
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:30 am

Araigh Not-an-ent
Probably the quickedst mini I've ever done, took about 15 minutes all up.
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:32 am

Belech (Radical dude! surfs up!)
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:33 am

Bloodmaw (Say: "Aaah")
Image
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:35 am

Caena (Bear with me)
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:37 am

Chysperis (Your basic sea serpent)
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:38 am

Druc (genitalia free)
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:40 am

Garrwag (Gaar!!)
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:44 am

KRULL (Not a bloodthirster...k?)
My dual-axe design predates Mierce's, so technically I should get royalties...
Image
Image
Image
Image
Image
Last edited by yxalitis on Sun Oct 16, 2016 11:27 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:49 am

Maalvor (sloth-man?)

Not my favourite colour scheme, I honestly tried everything on him...!
Technically not finished yet, still have to do the mouth, and base it.
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 7:55 am

Malacant (Mini me)
The mini Krull...great mini...and, yeah, I went red on him, but it's OK cos I stuck him on a lave-hell base.
That shield is a bitch to stick on, you can see where the pin came through that I used to try and stop it falling off every time my cat walks by.
BTW, he's not quite as bright as that...the camera has magnified the redness!
Image
Image
Image
ImageImage
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:00 am

Malmord (troll king)
Wonderful sculpt!
I separated the spears in his left hand, so they pointed straight.
Image
Forgive the flash in these:
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:03 am

Morannach (Your average bog beast)
Darn, the camera totally failed to capture the more subtle shade changes, and the highlighted veins (Vines?)
Image
Image
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:07 am

Scechus (then draw us like your French ladies)
I had a spare weapon after a miscast replacement, so I doubled-edged his axe.
Damn, he's gripping that so tight he's put a bend in the wood, the power! (That's my excuse..I'm sticking to it)
Image
Image
Image
Image
Last edited by yxalitis on Sun Oct 16, 2016 11:29 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:16 am

Thacaldan (Christmas beetle of HELL)
I decided after one look, that the legs had to be altered...I know this is a fantasy creature, but this is me talking here.
I moved them to be in line with the other legs, and after some hot-water treatment bent the legs out to evenly touch the ground:
Image
Image
Anyway, on to the paint job, I decided on an NII jade blue green finish (Non-iridescent iridescence)
Image
Image
Image
Image
Last edited by yxalitis on Sun Oct 16, 2016 11:30 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:20 am

Tykho (someone can't count)
After assembly I decided that something was wrong...maybe it that this creature was balancing on the point of two claws in a fashion that would make a ballerina wince?
So a rummage through my considerable stash of parts accumulated over a 30 year period, and I netted the perfect extra legs to bring this creature to a more anatomically correct stance, don't ask me from whence thy came, this is lost n the fog of history.
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:22 am

Ulmons (biceratops)
An older model, and a direct copy from one I saw on the interwebs...down to the gold plates.
Image
Image
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:28 am

uuthul (PLEASE ALT THIS TO CTHULHU!)
An amazing mini, I switched the anchor to a hand drafted harpoon for several reasons.
1. Anchors have the flukes at 90 degrees to the cross beam, so the anchor won't just lie flat on the ocean floor
2. NO ship in the time of Mierce history would have an anchor that big!
3. You can't wield a swinging weapon underwater (hence, spears and harpoons..right?)
4. It looks better, he's stabbing down at the puny humans!

This is actually the third incarnation of the harpoon, after I lost one blade from the best design, I'll have to redo it again, as I'm not pleased with this one.
Again the camera has pushed the glossiness to the max, it aint that shiny IRL...
And, yeah, the hand came loose, I'll have to fill that gap on the wrist...
Image
Image
Image
Image
Last edited by yxalitis on Sun Oct 16, 2016 11:32 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:32 am

Wyvern (Thypagwyern...something)
This is the second oldest Mierce mini I own, and I only finished it this year!
It went through numerous redesigns and repaints before I decided to just copy the Mierce official paint job...
Image
Image
Image
Image
Last edited by yxalitis on Sun Oct 16, 2016 11:33 am, edited 1 time in total.
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Sun Oct 16, 2016 8:35 am

Ygandr (Ye gads a A Hydra!)
Another one that got lost at the back of the table for far too long!
He's finished, but I'm sourcing a new base for him...
Image
Image
Image
Image
User avatar
JLLongshore
Posts: 85
Joined: Wed Mar 13, 2013 10:15 am

Re: My Mierce work

Postby JLLongshore » Sun Oct 16, 2016 10:04 am

Amazing.. thanks for sharing..
User avatar
Skull king
Posts: 49
Joined: Tue Feb 26, 2013 4:26 am
Location: Los Angeles

Re: My Mierce work

Postby Skull king » Sun Oct 16, 2016 2:50 pm

Wow! Great Stuff!
Krikke
Posts: 43
Joined: Tue May 10, 2016 1:42 pm

Re: My Mierce work

Postby Krikke » Mon Oct 17, 2016 6:13 am

Awesome work!
What's next on the painting table?
yxalitis
Posts: 55
Joined: Fri Mar 15, 2013 2:35 am

Re: My Mierce work

Postby yxalitis » Mon Oct 17, 2016 7:51 am

Krikke wrote:Awesome work!
What's next on the painting table?

Check out my WIP thread!
User avatar
Blæc Panþer
Posts: 32
Joined: Mon Oct 31, 2016 1:43 pm
Contact:

Re: My Mierce work

Postby Blæc Panþer » Mon Nov 07, 2016 12:43 pm

Love the water effect you did with Uuthülls base!
Looks so realistic!!
As all ways, have a good day!
User avatar
Blæc Panþer
Posts: 32
Joined: Mon Oct 31, 2016 1:43 pm
Contact:

Re: My Mierce work

Postby Blæc Panþer » Mon Nov 07, 2016 12:44 pm

Love the water effect you did with Uuthülls base!
Looks so realistic!!
As all ways, have a good day!
Philipp S.
Posts: 8
Joined: Sun Oct 09, 2016 6:54 pm

Re: My Mierce work

Postby Philipp S. » Thu Nov 10, 2016 8:30 pm

Love your collection! Funny that I'm not the only one having Mierce models lying on the desk for years before they get some paint :-)
My first one was Ysian's Rose of Ker-Ys back as a "Banelord" (don't know how many years ago...) and I primed her last week :-)

Return to “Finished Models Gallery”

Who is online

Users browsing this forum: No registered users and 6 guests